RINCOE MANTO AIO PLUS II KIT

What To Expect From The Rincoe Manto AIO Plus 2…

This is an update to the previous Manto AIO Plus – you can see the comparison below.

This is an AIO device which stands for “All In One”. In this design the tank and battery all live in the same housing.

You will need a single 18650 battery which is not supplied and the device will output from 10-80W.

Inside the mod is the new Manto 2.0 chip which provides both Variable Wattage and Smart user modes.

If you need to charge the battery in an emergency there is a 1A USB Type C port provided.

You get a digital display – but the size is not specified, plus there is an LED indicator located on the circuit board showing through the front panel.

Remove the rear panel to get access to the battery and tank.

Talking of the tank, this is compatible with existing Manto coils and you have the option of purchasing the kit with the RBA coil included.

The Manto coil range consists of the Mesh 0.15ohm coil and the Mesh 0.3ohm coil. Both coils are included in either kit.

There is an airflow adjustment wheel on the base of the tank to tailor the airflow restriction to your preference.

A side fill port is located behind the mod rear panel and the tank will hold up to 3.5ml of your own e-liquid.

Here is a short introduction video from the Rincoe-Official YouTube channel.

There are 4 colour options to choose from: Black, Green, Blue and Orange.

Kit Includes

You can buy the full kit (includes RBA) or without RBA.

Full Kit

• Rincoe Manto AIO Plus 2
• Cartridge / tank
• 0.3ohm Mesh coil (installed)
• 0.15ohm Mesh coil
• USB Type C cable
• Manto AIO RBA coil
• Accessories
• User manual

Without RBA

• Rincoe Manto AIO Plus 2
• Cartridge / tank
• 0.3ohm Mesh coil (installed)
• 0.15ohm Mesh coil
• USB Type C cable
• User manual

Rincoe Manto AIO Plus 2 Specs

• Size: 82.5×47.2×27.6mm
• Output: 10-80W (4.2V Max)
• Battery: Single 18650 (not included)
• User modes: VW, Smart
• Efficiency: 95%
• Display: Digital display – size not specified, LED indicator
• Resistance Limits: 0.1-3ohm
• E-liquid capacity: 3.5ml
• USB Type C Charging – 1A charge rate
• Compatible with all Manto AIO coils
• Manto 2.0 chipset
• RBA coil available in full kit or to purchase separately
• Bottom adjustable airflow
• Side fill port

This looks to be full of features and the option of a RBA coil does indeed make life interesting. The design is a bit “out there” – so I am not 100% sure what I think of it!

Anyway let me know (in the comments below) if the Rincoe Manto AIO Plus 2 is your style of device or whether it makes your eyes hurt a bit!